Residential · Charleston, SC
Stucco siding should look sharp and block water, not hide rot or trap moisture. Superior Stucco Charleston has served Charleston since 2017, installing and repairing traditional stucco and modern EIFS with clean edges, solid flashing, and long-term durability.
Good stucco siding starts with prep and a correct base assembly, not just a finish coat. We inspect the wall for soft sheathing, failed housewrap, missing kickout flashing, and corrosion at fasteners, then repair substrates as needed. For traditional stucco, we install WRB layers, self-adhered flashing at rough openings, weep screed at the base, galvanized or stainless lath, and code-appropriate control joints, then apply scratch coat and brown coat to proper thickness and plane. For EIFS, we use an adhesive or mechanical attachment, foam board, base coat with fiberglass mesh, then detail terminations so drainage and drying paths stay open.
Coastal heat, wind-driven rain, and salt air punish stucco siding systems, so detailing matters as much as material choice. We set expansion and control joints to manage movement, seal penetrations with backer rod and high-performance sealant, and build proper drip edges, head flashing, and window returns so water sheds forward. Finish options include acrylic finish coats, traditional cement-lime finishes, smooth, sand, or lace textures, and color coats matched to your existing facade. When repairs are needed, we cut back to sound material, address the moisture source first, then patch using compatible base coat and finish so the repair blends and does not telegraph through.
Charleston customers choose us because we treat stucco siding like an exterior wall system, not a cosmetic skim. Licensed and insured, we give a free written estimate and a clear scope that calls out WRB layers, flashing details, lath type, mesh weight, finish selection, and joint layout. Crews show up with the right equipment for a clean job, including mixers, trowels, hawks, straightedges, and scaffolding when needed, and we protect landscaping and hardscapes. You also get practical guidance on whether your home is better served by traditional three-coat stucco, a drainage EIFS, or a targeted repair plan.
Before we wrap, we walk the project with you and confirm edges, terminations, and water management details at windows, doors, decks, and rooflines. You receive a written estimate, product and finish notes, and straightforward care guidance, including sealant maintenance and cleaning recommendations that will not damage the finish. If the job includes repair, we document the affected areas and what was corrected behind the stucco so you are not guessing later. The goal is simple: stucco siding that looks consistent, drains correctly, and holds up season after season.
Yes. We provide a free written estimate after an on-site evaluation of the affected elevations, penetrations, and transitions.
Yes. Superior Stucco Charleston is licensed and insured for stucco contracting work.
Small cut-out repairs can take 1-2 days plus cure time, while full replacements or multi-elevation work can run 1-3 weeks depending on scope, access, and weather.
We work on traditional cement-based stucco (scratch, brown, finish coats) and can service EIFS when specified, including mesh-reinforced base coats and compatible finishes.
Limit irrigation against the wall, document interior staining, and contact us for an assessment. Avoid repeated caulking until the entry point and wall assembly details are verified.
Stucco siding is a durable, low-maintenance exterior when it is built as a complete moisture-managed system. Superior Stucco Charleston installs new stucco siding and performs targeted repairs for cracks, stains, soft spots, and impact damage, with careful attention to the layers behind the finish. That means correct water-resistive barriers, flashing, weep screeds, lath or foam placement, and compatible coats so the wall can shed water and dry properly.
For new stucco siding installation, we start by evaluating the existing substrate, window and door openings, roof-to-wall intersections, and deck connections. We then build the wall assembly using proven components such as self-adhered flashing tapes, properly lapped WRB layers, galvanized or stainless steel lath for traditional stucco, or foam insulation boards with fiberglass mesh for EIFS. Scratch and brown coats are applied and leveled before the finish coat, and terminations are set to promote drainage, including weep screeds at the base and drip edges where required.
For stucco siding repair, we take a diagnostic approach. Hairline cracks may need routing and sealing, while larger cracks, bulges, or recurring stains can indicate missing flashing, failed sealant joints, or trapped moisture behind the cladding. We remove loose material back to solid edges, correct the underlying issue, then rebuild the patch with compatible base coats and finish coats so the repaired area cures properly and resists future separation. Where needed, we add or repair control joints to reduce stress and help prevent repeat cracking.
If you want stucco siding that performs like it should, the details matter: window returns, head flashing, kickout flashing, sealed penetrations, and clean transitions to brick, Hardie board, or trim. Our team provides a clear scope, realistic timelines, and workmanship that prioritizes water management and finish consistency. Request a free written estimate and we will recommend the right install or repair plan for your property.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Charleston. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
